English
繁体中文
简体中文
Deutsch
产品展示
LRS-200-12V/24V/48V
- 产品详情
-
■Features
‧AC input range selectable by switch
‧Withstand 300VAC surge input for 5 second
‧Protections: Short circuit / Overload / Over voltage /
Over temperature
‧Cooling by free air convection
‧1U low profile
‧Withstand 5G vibration test
‧LED indicator for power on
‧No load power consumption<0.75W
‧100% full load burn-in test
‧High operating temperature up to 70℃
‧Operating altitude up to 5000 meters (Note.8)
‧High efficiency, long life and high reliability
‧3 years warranty
■ Applications
‧Industrial automation machinery
‧Industrial control system
·Mechanical and electrical equipment
·Electronic instruments, equipments or apparatus
■Description
LRS-200 series is a 200W single-output enclosed type power supply with 30mm of low profile design. Adopting the input of 115VAC or 230VAC (select by switch), the entire series provides an output voltage line of 3.3V, 4.2V, 5V, 12V, 15V, 24V, 36V and 48V.
In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of LRS-200 that the whole series operates from -25℃ through 70℃ under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.75W), it allows the end system to
easily meet the worldwide energy requirement. LRS-200 has the complete protection functions and 5G anti- vibration capability; it is complied with the international safety regulations such as IEC/UL 62368-1.
LRS-200 series serves as a high price-to-performance power supply solution for various industrial applications.MODEL
LRS-200-3.3
LRS-200-4.2
LRS-200-5
LRS-200-12
LRS-200-15
LRS-200-24
LRS-200-36
LRS-200-48
OUTPUT
DC VOLTAGE
3.3V
4.2V
5V
12V
15V
24V
36V
48V
RATED CURRENT
40A
40A
40A
17A
14A
8.8A
5.9A
4.4A
CURRENT RANGE
0 ~ 40A
0 ~ 40A
0 ~ 40A
0 ~ 17A
0 ~ 14A
0 ~ 8.8A
0 ~ 5.9A
0 ~ 4.4A
RATED POWER
132W
168W
200W
204W
210W
211.2W
212.4W
211.2W
RIPPLE & NOISE (max.) Note.2
150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE
2.97 ~ 3.6V
3.6 ~ 4.4V
4.5 ~ 5.5V
10.2 ~ 13.8V
13.5 ~ 18V
21.6 ~ 28.8V
32.4 ~ 39.6V
43.2 ~ 52.8V
VOLTAGE TOLERANCE Note.3
±3.0%
±4.0%
±3.0%
±1.5%
±1.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION Note.4
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION Note.5
±2.5%
±2.5%
±2.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
1500ms, 50ms/230VAC 1500ms,50ms/115VAC at full load
HOLD UP TIME (Typ.)
16ms/230VAC 12ms/115VAC at full load
INPUT
VOLTAGE RANGE
90 ~ 132VAC / 180 ~ 264VAC by switch 240 ~ 370VDC (switch on 230VAC)
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
83%
86%
87%
87.5%
88%
89.5%
89.5%
90%
AC CURRENT (Typ.)
4A/115VAC 2.2A/230VAC
INRUSH CURRENT (Typ.)
COLD STAR 60A/115VAC 60A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
PROTECTION
OVER LOAD
110 ~ 140% rated output power
3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
OVER VOLTAGE
3.8 ~ 4.45V
4.6 ~ 5.4V
5.75 ~ 6.75V
13.8 ~ 16.2V
18 ~ 21V
28.8 ~ 33.6V
41.4 ~ 46.8V
55.2 ~ 64.8V
3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
OVER TEMPERATURE
3.3~36V Hiccup mode, recovers automatically after fault condition is removed. 48V Shut down and latch off o/p voltage, re-power on to recover.
ENVIRONMENT
WORKING TEMP.
-25 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
OVER VOLTAGE CATEGORY
Ⅲ: According to EN61558, EN50178, EN60664-1, EN62477-1; altitude up to 2000 meters
SAFETY & EMC
(Note.9)
SAFETY STANDARDS
IEC/UL 62368-1, BSMI CNS15598-1,EAC TP TC 004, KC62368-1(for LRS-200-12/24 only),GB 4943.1, BIS IS13252(Part1):2010/IEC 60950-1: 2005(NOTE 12) ,BS EN/EN61558-1, BS EN61558-2-16 Designed by AS/NZS 61558.1/2.16, AS/NZS 62368.1,BS EN/EN62368-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BSMI CNS15936, EAC TP TC 020,KS C 9832, KS C 9835(for LRS-200-12/24 only)
EMC IMMUNITY
Compliance to BS EN/EN55035, EAC TP TC 020,KS C 9832, KS C 9835(for LRS-200-12/24 only)
OTHERS
MTBF
2346.6K hrs min. Telcordia SR-332 (Bellcore) ; 279.4Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
215*115*30mm (L*W*H)
PACKING
0.66Kg; 15pcs/10.9Kg/0.67CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
7. The 150% peak load capability is built in for up to 1 second for 12~48V.LRS-200 will enter hiccup mode if the peak load is delivered for over 1 second and will recover once it resumes to the rated current level(115VAC/230VAC).
8. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft).
9. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
10. This power supply does not meet the harmonic current requirements outlined by BS EN/EN61000-3-2. Please do not use this power supply under the following conditions:
a) the end-devices is used within the European Union, and
b) the end-devices is connected to public mains supply with 220Vac or greater rated nominal voltage, and
c) the power supply is:
- installed in end-devices with average or continuous input power greater than 75W, or
- belong to part of a lighting system Exception:
Power supplies used within the following end-devices do not need to fulfill BS EN/EN61000-3-2
a) professional equipment with a total rated input power greater than 1000W;
b) symmetrically controlled heating elements with a rated power less than or equal to 200W
11. RCM is on voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.
12. Some model may not have the BIS logo, please contact your MEAN WELL sales for more information.
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
相关产品
产品询价
敬请留下您的留言内容，我们收到后会迅速与您联系，感谢支持！
常见问题
问
香烟盒三维包装机特点？
答
问
全自动扑克透明膜三维包装机包装产品？
答
全自动扑克透明膜三维包装机主要适用于散装扑克、压缩饼干，沙琪玛、报事贴、便笺纸、威化饼干等散状或多件物体集合的三维包装。
